Below is a list of Union Tuf-GripTM Assemblies. The name Tuf-GripTM says it all. Tuf-GripTM fittings are securely attached to the wire rope by “clamping forces” that grip the rope and allow the tensile load to be transferred into the fitting. That in turn allows the load to be transferred to the point of attachment on your equipment. The result: an effective transfer of tensile forces from the rope through the fitting and into the point of attachment. To view detailed product information, click the product name.


Threaded Sleeve SW-701

Threaded Sleeve SW-701

Threaded Sleeve SW-701

  • Maximize the length adjustment of your assembly at the point where a wire rope is attached
  • Equivalent to SA155 Series
More Product Info

Threaded Stud SW-702

Threaded Stud SW-702

Threaded Stud SW-702

  • For applications that require a simple threaded assembly
  • Equivalent to SA156 Series
More Product Info

Threaded Stud SW-720

Threaded Stud SW-720

Threaded Stud SW-720

  • When dimensions for thread length exceed Lt of the SW-701
  • For custom assemblies where the nominal thread diameter is less than D of SW-702
More Product Info

Button Ferrule SW-705

Button Ferrule SW-705

Button Ferrule SW-705

  • Excellent as a drum attachment device
  • Button Ferrules develop the minimum breaking force of wire rope
  • Apply at any position along an assembly to serve many functions
  • Equivalent to SA157 Series
More Product Info

Large Ring Eye SW-706

Large Ring Eye SW-706

Large Ring Eye SW-706

  • Offers many advantages for hanger-type applications
  • Features a large eye opening to make attachment easy
  • Provides a large internal bearing surface
  • Equivalent to SA149 Series
More Product Info

Pin Eye SW-703

Pin Eye SW-703

Pin Eye SW-703

  • Ideal for clevis-type attachments
  • Large pin bearing area with a durable, weldless, drop-forged steel construction
  • Equivalent to SA154 Series
More Product Info

Aluminum and Copper Sleeves (Crimped Assemblies)

Aluminum and Copper Sleeves (Crimped Assemblies)

Aluminum and Copper Sleeves (Crimped Assemblies)

  • Made with either 99% pure copper or high-quality aluminum alloys
  • Economical terminations for non-critical applications
  • Heat-treated to offer maximum cold-forming properties and long service life
More Product Info

Aluminum and Copper Button Stops (Crimped Assemblies)

Aluminum and Copper Button Stops (Crimped Assemblies)

Aluminum and Copper Button Stops (Crimped Assemblies)

  • Made with either 99% pure copper or high-quality aluminum alloys
  • Economical terminations for non-critical applications
  • Heat-treated to offer maximum cold-forming properties and long service life
More Product Info

Jaw SW-704

Jaw SW-704

Jaw SW-704

  • Offers excellent pin bearing surface for your applications
  • Depend on long life with its rugged, one-piece, drop-forged steel construction
  • Equivalent to SA152 Series
More Product Info

Open Socket SW-710

Open Socket SW-710

Open Socket SW-710

  • Built with one-piece, drop-forged steel
  • Rugged and compact
  • Equivalent to SA163 Series
More Product Info

Closed Socket SW-709

Closed Socket SW-709

Closed Socket SW-709

  • Attached in the same plane as the fitting on the other end of the assembly unless you specify otherwise
  • Measure the length of each from the center of the pin hole
  • Equivalent to SA164 Series
More Product Info

Eye RA-2482

Eye RA-2482

Eye RA-2482

  • Easily aligns to any plane
  • Made with durable corrosion-resistant stainless steel, grade 303Se or 305
  • Stamped and formed to dimension
More Product Info

Fork RA-2500

Fork RA-2500

Fork RA-2500

  • Easily aligns to any plane
  • Made with durable corrosion-resistant stainless steel, grade 303Se or 305
  • Stamped and formed to dimension
More Product Info

Double Shank Ball MS-20663

Double Shank Ball MS-20663

Double Shank Ball MS-20663

  • Made according to MIL-DTL-781 specifications
  • Built with grade 303Se or 305 stainless steel
More Product Info

Single Shank Ball MS-20664

Single Shank Ball MS-20664

Single Shank Ball MS-20664

  • Manufactured according to MIL-DTL-781 specifications
  • Standard material is stainless steel, grade 303Se or 305
  • SA664 for non-military applications
More Product Info

Stud End MS-21259

Stud End MS-21259

Stud End MS-21259

  • Made with grade 303Se or 305 stainless steel
  • Made to MIL-DTL-781 specifications and drilled for a tie wire
  • SW702 for non-military applications
More Product Info

Turnbuckle End MS-21260

Turnbuckle End MS-21260

Turnbuckle End MS-21260

  • Made with grade 303Se or 305 stainless steel
  • Made to MIL-DTL-781 specifications
  • Drilled for a tie wire
More Product Info

Fork End MS-20667

Fork End MS-20667

Fork End MS-20667

  • Made to MIL-DTL-781 specifications
  • Made with a durable grade 303Se or 305 stainless steel construction
  • SW667 for non-military applications
More Product Info

Eye End MS-20668

Eye End MS-20668

Eye End MS-20668

  • Made to MIL-DTL-781 specifications
  • Made with a durable grade 303Se or 305 stainless steel construction
  • SW667 for non-military applications
More Product Info

Apex

Apex

Apex

  • The highest minimum breaking force available
  • Superior fatigue resistance
  • Unitized construction for exceptional strength-to-diameter ratio
More Product Info