Threaded Stud SW-702

You can depend on the tolerances with this assembly. The standard stud material is carbon steel, but stainless steel and higher strength steels are also available. We furnish the studs without wrench flats unless specified on the order. Please indicate dimensions across the flats, the number of sides, and the location on the fitting.

When measuring the thread length, use the minimum dimensions to make use of existing qualified designs. Thread length may be increased if desired. The standard thread used is Right Hand National Coarse Class 2A, but other threads are available on request.

Please specify the Ls, Lt and D.

Custom designs with different fitting lengths and thread diameters are available, but that may reduce the assembly's rated capacity.

  • For applications that require a simple threaded assembly
  • Equivalent to SA156 Series

Dimensions for Threaded Stud SW-702
Dash No. Rope Dia. D Lt Approx. Ls As
2 1/16 10 1/2 1 1/4 5/32
3 3/32 1/4 1/2 1 13/32 7/32
4 1/8 1/4 3/4 1 7/8 7/32
5 5/32 5/16 7/8 2 1/2 1/4
6 3/16 3/8 1 2 7/8 5/16
7 7/32 7/16 1 3 3/8
8 1/4 1/2 1 1/8 3 5/16 7/16
9 9/32 9/16 1 1/4 3 11/16 1/2
10 5/16 5/8 1 1/2 4 1/8 9/16
12 3/8 3/4 1 5/8 5 1/8 5/8
14 7/16 3/4 1 7/8 5 13/16 5/8
16 1/2 7/8 2 1/4 6 5/8 3/4
18 9/16 1 2 1/2 7 3/8 7/8
20 5/8 1 1/8 3 8 1/4 1
24 3/4 1 3/8 3 1/4 9 3/8 1 1/4
28 7/8 1 1/2 3 1/2 10 5/8 1 3/8
32 1 1 3/4 4 3/8 12 3/4 1 9/16
36 1 1/8 2 4 3/4 13 3/4 1 3/4
40 1 1/4 2 1/4 5 1/8 15 1/2 2
44 1 3/8 2 1/2 5 1/2 16 1/2 2 1/4

All dimensions are in inches.

Special constructions and diameters available upon request – please contact us directly.